Airtac DPS Series Pressure Switch


  • Do not drop knock or apply excessive impact while handling. Otherwise could cause damage and a malfunction.
  • The tensile strength of the cord is 60N. Applying a greater pulling force on it can cause a malfunction.
  • Do not exceed the screw-in torque of 7N.m when installing piping. Exceeding this value may cause malfunctioning of the sensor.
  • Do not use it with corrosive and/or flammable gases or liquids.
  • Please use it within rated pressure range.
  • Turn off the power before connecting the wires.
  • Don’t use in an environment with spattering liquid of oil or solvent. 8. Separate power lines from high voltage lines, avoiding wiring in the same conduit with these lines.
  • When output current exceeds 100mA, circuit protection will be activated. System will resume once reboot.
  • Adjust output-response response time can avoid errors caused by sudden change of working pressure. 11.There is no copy function for PNP type.
Last revised: August 17, 2023